Components of the Net Current in Differential Pulse Polarography. Part 2. Kinetics and Adsorption

Components of the net response in differential pulse polarography were studied theoretically, assuming gradually changing electrode rate constant or strength of the reactant adsorption. The difference between the maximum potential of the peak component and the half‐wave potential of the wave component appear as an important parameter. From its value, the electrode rate constant can be calculated even when the standard potential is not known. In a reversible process, effects of the reactant adsorption on the mentioned separation are less pronounced. The results were compared with experimentally obtained effects. For deeper insight into the applicability of this approach, additional experimentally obtained polarograms (that reflect different potential/timing parameters or changing character of the electrode process) should be studied in terms of their components.     

Ultra Sensitive Quantification of Thiourea at Nanomolar Level by Catalytic‐Kinetic Differential Pulse Voltammetry

A new simple and highly selective and sensitive catalytic differential pulse voltammetry procedure for the determination of thiourea at nanomolar level is reported. Thiourea has a catalytic effect on the oxidation of Janus green by iodate in the hydrochloric acid medium. The potential was scanned in the negative direction and the differential pulse voltammograms were recorded. The variations of the peak current with hydrochloric acid concentration, oxidant, Janus green, pulse amplitude, pulse time and scan rate were optimized. Under the optimized conditions, the relationship between the peak current and concentration of thiourea was obtained. It is shown that the calibration curve is linear in the range of 0.01–6.00 µg/mL. The detection limit of the method was 0.005 µg/mL. The relative standard deviation for 6 replicate determinations of 0.01, 0.50 and 2.00 µg/mL is equal to 2.25%, 1.52% and 1.03%, respectively. The method was applied to the determination of thiourea in fruit juices with satisfactory results.     

嵌入式碳纳米管石墨电极测定灯盏花素的研究

制备嵌入式多壁碳纳米管修饰石墨电极,利用循环伏安法(CV)研究灯盏花素在嵌入式多壁碳纳米管修饰石墨电极(ESCFE)上的电化学氧化行为,结果表明,灯盏花素在修饰电极上出现一对明显的准可逆氧化还原峰,峰电位分别为Epa=0.17 V和Epc=0.05 V(△E=0.12 V),峰电流分别为ipa=42.79μA,ipc=...     

Simultaneous determination of three 5-nitroimidazoles in foodstuffs by differential pulse voltammetry and chemometrics

The voltammetric behaviour of three 5-nitroimidazoles,metronidazole,tinidazole and ornidazole,was investigated,and a method was developed for the simultaneous determination of these compounds,based on their reduction at a hanging mercury drop electrode(HMDE) in pH 8.95 buffer with differential pulse voltammetric(DPV) approach.Well defined voltammetric waves with peak potentials of -692,-640 and -652 mV were observed for these compounds,respectively.It is difficult to determine them individually from their mixtures without preseparation,for their voltammetric peaks overlapped seriously,so the chemometrics were used to resolve the overlapped voltammogram and quantify the mixtures.The proposed method was successfully applied to the determination of three 5-nitroimidazoles in milk and honey samples.     

茜素S复合铋膜电极电催化还原氯霉素

本研究采用电化学法制备茜素S复合铋膜修饰玻碳电极,利用循环伏安法、差示脉冲伏安法(DPV)研究氯霉素在茜素S复合铋膜电极上的电化学行为,并对其电化学测试条件进行优化.在pH 7.0的KH2PO4-Na2HPO4缓冲溶液中,氯霉素在-0.63 V处产生一灵敏的不可逆还原峰,显示出复合铋膜对氯霉素的还原有很好的催化作用.D...     

Adaptive nematic liquid crystal lens array with resistive layer

ABSTRACT

We propose an adaptive nematic liquid crystal (LC) lens array using a dielectric layer with low dielectric constant as resistive layer. With the resistive layer and periodic-arranged iridium tin oxide (ITO) electrodes, the vertical electric field across the LC layer varies linearly over the lens aperture is obtained in the voltage-on state. As a result, a centrosymmetric gradient refractive index profile within the LC layer is generated, which causes the focusing behaviour. As a result of the optimisation, a thin cell gap which greatly reduces the switching time of the LC lens array can be achieved in our design. The main advantages of the proposed LC lens array are in the comparatively low operating voltage, the flat substrate surface, the simple electrodes, and the uniform LC cell gap. The simulation results show that the focal length of the LC lens array can be tuned continuously from infinity to 3.99 mm by changing the applied voltage.     

纳通道的物质传输特性及应用

近年来,随着材料科学、微纳加工技术和微纳尺度物质传输理论的发展,纳通道技术得到了越来越多的研究和关注。纳通道包括生物纳通道和人工纳通道,其孔径通常为1~100 nm。在这一尺度下,通道表面与通道内物质之间的作用概率大大增强,使得纳通道表现出许多与宏观体系不同的物质传输特性,例如通道表面电荷与通道内离子之间的静电作用产生了离子选择性,通道内电化学势的不对称分布产生了离子整流特性,物质传输过程中占据通道产生了阻塞脉冲特性等。纳通道中的这些物质传输特性在传感、分离、能源等领域具有广泛应用,例如通过对纳通道进行功能化修饰可以实现门控离子传输;利用亚纳米尺度的通道可以实现单分子传感;利用通道与传输物质之间的相互作用可以实现离子、分子、纳米粒子的分离;利用纳通道的离子选择性可以在通道内实现电荷分离,将不同形式的能量（如光、热、压力、盐差等）高效转化为电能。纳通道技术是化学、材料科学、纳米技术等多学科的交叉集合,在解决生物、环境、能源等基本问题方面具有良好的前景。该文综述了近10年来与纳通道物质传输理论以及纳通道技术应用相关的前沿研究,梳理了纳通道技术的发展过程,并对其在各个领域的应用进行了总结与展望。     

脉冲熔融-飞行时间质谱法测定Ti-Al合金中Ar

本文以标准气体参考物质为依据绘制Ar校准曲线,利用脉冲熔融-飞行时间质谱法建立准确测定钛铝合金中Ar的方法。程序升温法确定钛铝合金中氩可以在分析功率为2800 W时完全释放。并对比了助熔剂和称样量等分析条件对实验结果的影响,结果表明,采用高纯镍篮,钛铝合金中Ar释放完全。本方法测定值与传统脉冲熔融-热导法测定结果基本一致。     

Characterization of an electrochemical mercury sensor using alternating current,cyclic, square wave and differential pulse voltammetry

Here we report the characterization of an electrochemical mercury (Hg²⁺) sensor constructed with a methylene blue (MB)-modified and thymine-containing linear DNA probe. Similar to the linear probe electrochemical DNA sensor, the resultant sensor behaved as a “signal-off” sensor in alternating current voltammetry and cyclic voltammetry. However, depending on the applied frequency or pulse width, the sensor can behave as either a “signal-off” or “signal-on” sensor in square wave voltammetry (SWV) and differential pulse voltammetry (DPV). In SWV, the sensor showed “signal-on” behavior at low frequencies and “signal-off” behavior at high frequencies. In DPV, the sensor showed “signal-off” behavior at short pulse widths and “signal-on” behavior at long pulse widths. Independent of the sensor interrogation technique, the limit of detection was found to be 10 nM, with a linear dynamic range between 10 nM and 500 nM. In addition, the sensor responded to Hg²⁺ rather rapidly; majority of the signal change occurred in <20 min. Overall, the sensor retains all the characteristics of this class of sensors; it is reagentless, reusable, sensitive, specific and selective. This study also highlights the feasibility of using a MB-modified probe for real-time sensing of Hg²⁺, which has not been previously reported. More importantly, the observed “switching” behavior in SWV and DPV is potentially generalizable and should be applicable to most sensors in this class of dynamics-based electrochemical biosensors.